Home > Products > Welding Wire > ER70S-6 Stainless Steel
ER70S-6 Stainless Steel
  • ER70S-6 Stainless SteelER70S-6 Stainless Steel

ER70S-6 Stainless Steel

GUJIN® is a professional ER70S-6 Stainless Steel manufacturers and suppliers in China. For Stainless steel welding wire, everyone has different special concerns about it, and what we do is to maximize the product requirements of each customer, so the quality of our Stainless steel welding wire has been well received by many customers and enjoyed a good reputation in many countries. GUJIN® Stainless steel welding wire have characteristic design & practical performance & competitive price, for more information on the Stainless steel welding wire, please feel free to contact us.

Model:ER70S-6

Send Inquiry

Product Description

GUJIN® is a professional ER70S-6 Stainless Steel manufacturers and suppliers in China. If you interested in ER70S-6 Stainless Steel products, please contact with us. GUJIN® AWS Class ER70S-6 is a mild steel welding wire that contains higher levels of manganese and silicon than other standard grades of MIG wire to produce high quality welds when used on dirty, oily, or rusty steel. The high silicon content increases the fluidity of the weld pool, thus creating a smoother bead appearance and resulting in minimal post-weld grinding. This wire is engineered to provide porosity-free, x-ray quality welds at the highest tensile strength (as welded) of all the plain carbon steel wires. This product requires a shielding gas: CO2 and/or CO2 mix.

ER70S-6 Stainless Steel Typical Applications:

• General shop applications with poor fit-up or rusty, oily plates

• Steel castings or forging salvage

• Home projects

• Tanks

• Sheet metal 

• Construction work

ER70S-6 Stainless Steel Notes:

1.Keeping the package of the wire in good condition before welding.

2.To avoid welding defects the shield gas should be pure particularly no moisture in it.

3.The surfaces to be welded must be cleaned away from impurities of oil contamination, rust, moisture and so on.

4.The flowrate of the shield gas should be 20L-25L/minute and arc length in welding should be 4mm-6mm.

5.Mechanical properties, crack resistance and appearance of the weld metal are affected by heat input in welding so should pay more attention to it.

6.The welding conditions mentioned above for reference only and it is better to do a welding procedure qualification according to project before put it into formal welding.


Mechanical Properties

Yield Strength

(Mpa)

Yield Strength

(Mpa)

Elongation

(%)

Guarantee value

≥550

≥30

General result

580

39


Product

Name

Chemical composition of welding wire

C

Mn

Si

P

S

Cr

Ni

Cu

ER70S-6

0.06-0.15

1.4-1.85

0.8-1.15

0.025

0.035

0.15

0.15

0.5

Welding Positions:

 


 


Hot Tags: ER70S-6 Stainless Steel, China, Manufacturers, Suppliers, Wholesale, Factory, Cheap, Quotation, CE, Quality, Advanced
Related Category
Send Inquiry
Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept